Mid-Tower E-ATX Gaming Case
Outstanding Compatible Performance
UNLIMITED CONFIGURATION OPTIONS
Maximum Expansion Potential
The DP503 gaming case features an extensive interior and powerful compatibility. 2 x 360mm can be installed in the front & on the top simultaneously.
HIGH-AIRFLOW Mesh Front Panel
Comes with a mesh front panel, along with ventilation on the top, at the bottom and in the PSU chamber, which will accelerate the airflow circulation and enhance the cooling performance.
– Massive Mesh Front Panel with Slanted Bar Design.
– The Magnetic Dust Filter on the Top.
– Pull-Out Dust Filter at the Bottom.
Three addressable RGB fans Included
Pre-installed at the front for efficient airflow and customizable RGB lighting.
ARGB & PWM CONTROL HUB
The control hub supports up to 6 fans and 6 LED device.
Connect it to your motherboard for 16.8 million possible colors.
– 6 x 3-pin connectors for ARGB signal
– 6 x 3-pin PWM fan connectors
Building a Clean PC is within Easy Reach
Well-designed cable routing makes wiring easy and simple, with a spacious 23mm of space for cables.
– Cable channels with grove on top for stable routing
– Space for cable management: 23mm
– 8 x cable routing grommets included
– 3 x Antec logo cable ties
DRIVE BAYS COMPATIBILITY
Fits Up To 4 Drive Devices
– Snap-in 2.5″ drive device for easy mounting.
– Removable hard drive cage.
– Tool-free 3.5″ drive tray
TYPE-C 3.2 GEN 2 READY
LED Control Button
2 x USB 3.0
1 x Type-C 3.2 Gen 2
– Captive thumb screws
– 7 x full profile & reusable expansion slots
– Removable GPU holder, able to be adjusted up, down, left and right
– Rear-mounted PSU installation
– 4mm seamless tempered glass side panel (the groves at the bottom can prevent the glass from shattering)
9 fans simultaneously
– 3 x 120mm ARGB fans and a 360 mm radiator can be installed simultaneously in the front interior for better cooling performance.
– Motherboard support: E-ATX, ATX, Micro ATX, ITX
– CPU cooler max height: < 170mm
– GPU max length: < 375mm
– Power supply max length: < 205mm (with HDD) / < 410mm (without HDD) Form Factor
Front Access & Controls
LED control button
2 x USB 3.0
1 x TYPE-C 3.2 Gen 2
4mm Tempered Glass
3.5″ / 2.5″: 2 / 2
Front: 3 x 120mm / 3 x 140mm / 2 x 185mm
Top: 3 x 120mm / 2 x 140mm
Power Supply Shroud: 2 x 120mm
Rear: 1 x 120mm
Front: 3 x 120mm ARGB fans
Front: 120 / 140 / 240 / 280 / 360mm
Top: 120 / 140 / 240 / 280 / 360mm
Max GPU Length: = 375mm
Max CPU Cooler Height: = 170mm
Max PSU Length: = 205mm (with HDD) / = 410mm (without HDD)
Cable Routing Space: = 23mm
Fan & LED Control Hub
Cable Routing Grommets (8 pcs)
Fixed Cable Ties (3 pcs)
Captive Thumb Screws (Side panels, GPU Holder, PSU Brace)
Top / Bottom
Dimensions ( D x W x H )
483 x 220 x 492 mm